Free wachovia possibilities software for pda

Kabooma Lite 1.0 is a popular and enjoyable game which will inspire you with endless creative possibilities and amuse you with unexpected moments of surprise and mischief!

The mad goblin wants to blow up the entire world, unfortunately he got his dynamite gun powder trails all mixed up. Help him by setting up the trail to the explosives, so he can destroy everything. Once the fuse starts burning you have to quickly rotate the gun powder trails to form a route leading to the explosives. If the fire reaches a dead end you lose a life. Run out of all your lives and the goblin will eat you.

Note: The "Download Now" link directs you to the iTunes App Store, where you must continue the download process. You must have iTunes installed in order to open the link, and you must have an active iTunes account to download the application. This download may not be available in some countries.

StopWatch is a simple application for measuring time with possibility to register several (up to nine) results and suspend/resume measurement.
Notes:
StopWatch works in one of two modes: run mode and inspect mode. In run mode it is possible to register results and in inspect mode - watch them.
To start StopWatch press any of *, 0 or # buttons. StopWatch is now in run mode and digits at the center of the screen shows elapsed time. At the top of the screen there is an identifier of current measure. To register result for this measure (first sportsman if finished) press any button on joystick. The number at the top of the screen is changed to next one and you can register time for the next sportsman. StopWatch is able to register up to 9 results.
It is also possible to register results not in increasing order of measure identifier. To register result of sportsman with number N, press button N.
To suspend measure press # button. To resume measure - press # button. Pause time (time between suspend and resume) is excluded from measurement.
Pressing once again at * button will stop the watch and midlet is now switched to inspection mode. In this mode it is possible to view results of each sportsman either listing them using joystick (LEFT and UP buttons shows result of previous sportsman, RIGHT, DOWN and FIRE - result of the next sportsman), either directly select sportsman by its number using 1-9 buttons.
System requirements:
- Java MIDP 1.0

Using the Palm OS application "Schoolwerk" you student can manage all your homework, marks and your timetable.
This is the Dutch version of Schoolwork.
Youll get used to the very flexible and neat user environment in a matter of days (if not hours), and when youre used to it, you dont want to go to school without it!
A short list of possibilities:
You can enter an infinite amount of homework items. You can enter homework very fast by choosing a date, selecting the hour on your timetable and fill in the homework.
You can view the homework on three different periods: per day, per week and per month.
You can enter your marks per subject, with a weight (example: a test counts 1 time, an exam 5 times) term and description. The average mark will be calculated without any trouble, and will be rounded off to one decimal.
You can list all your marks for a subject in a summary.
You can easily view your report, on which all your averages are listed, per period (1, 2, 3, 4 and year average).
You can enter your timetable very easy: you choose a subject, the teacher will be placed automatically, and finally you enter the room.
You can view your timetable per day or per week!
Enhancements:
- + The "Add homework" screen now uses "1st" and "2nd" nstead of "1th" and "2th".
- ! Fixed an error when checking or moving homework (occured in rare cases).
- + The homework screen now makes use of the extra space when the Dynamic Input Area is collapsed.
- - Removed a setting: Only show homework of this subject.
- Marks
- + When viewing a list of marks for a subject, an average of the marks is calculated and shown.
- + Extra setting: hide subjects that dont have any marks on reports.
- + Unsatisfactory marks (< 5.5) are now coloured red on reports.
- + The list marks screen now makes use of the extra space when the Dynamic Input Area is collapsed.
- + The report screen now makes use of the extra space when the Dynamic Input Area is collapsed.
- Timetable
- + Rewrote timetable weekview. This has increased performance a lot.
- Other
- ! Bitmaps are used no more for separators, as these caused Unsupported Bitmap Format errors.
- - The program doesnt expire in August next year anymore.
- + The main screen now makes use of the extra space when the Dynamic Input Area is collapsed.
- + The image on the main screen now looks a bit better on monochrome devices.
- + Added a function to export and import homework to a CSV-file.
- + Added a function to export and import marks to a CSV-file.
- ! Fixed an error occuring when viewing homework or marks just after editing subjects.

Using the Palm OS application "Schoolwork" you student can manage all your homework, marks and your timetable.
Youll get used to the very flexible and neat user environment in a matter of days (if not hours), and when youre used to it, you dont want to go to school without it!
A short list of possibilities:
You can enter an infinite amount of homework items. You can enter homework very fast by choosing a date, selecting the hour on your timetable and fill in the homework.
You can view the homework on three different periods: per day, per week and per month.
You can enter your marks per subject, with a weight (example: a test counts 1 time, an exam 5 times) term and description. The average mark will be calculated without any trouble, and will be rounded off to one decimal.
You can list all your marks for a subject in a summary.
You can easily view your report, on which all your averages are listed, per period (1, 2, 3, 4 and year average).
You can enter your timetable very easy: you choose a subject, the teacher will be placed automatically, and finally you enter the room.
You can view your timetable per day or per week!
Enhancements:
- Homework
- + The "Add homework" screen now uses "1st" and "2nd" nstead of "1th" and "2th".
- ! Fixed an error when checking or moving homework (occured in rare cases).
- + The homework screen now makes use of the extra space when the Dynamic Input Area is collapsed.
- - Removed a setting: Only show homework of this subject.
- Marks
- + When viewing a list of marks for a subject, an average of the marks is calculated and shown.
- + Extra setting: hide subjects that dont have any marks on reports.
- + Unsatisfactory marks (< 5.5) are now coloured red on reports.
- + The list marks screen now makes use of the extra space when the Dynamic Input Area is collapsed.
- + The report screen now makes use of the extra space when the Dynamic Input Area is collapsed.
- Timetable
- + Rewrote timetable weekview. This has increased performance a lot.
- Other
- ! Bitmaps are used no more for separators, as these caused Unsupported Bitmap Format errors.
- - The program doesnt expire in August next year anymore.
- + The main screen now makes use of the extra space when the Dynamic Input Area is collapsed.
- + The image on the main screen now looks a bit better on monochrome devices.
- + Added a function to export and import homework to a CSV-file.
- + Added a function to export and import marks to a CSV-file.
- ! Fixed an error occuring when viewing homework or marks just after editing subjects.

NoniGPSPlot allows you to locate your position in relation to other GPS points and to see the journey you have made.
It may be used to find your starting place in a port after sailing, or the place where you start a walking or biking excursion, or even your car in a parking. Any place long as you know its GPS coordinates.
It stores the whole journey too. And you can export a KML file to visualize it in Google Earth.
Note:
The language of this software is in French.
Enhancements:
- Jpeg format for maps
- Possibility to load and unload maps
- Optimization of traks display
- Export in GPX
- Some bugs less.
System requirements:
- Pocket PC 2003 / WM 5.0
- ARM/XScale Processors
- GPS NMEA

Application for unlocking phones that are locked to network operators. Supported are Nokia and Siemens phones. Author will appreciate your feedback.

THIS MOBILE APPLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. AUTHOR AND COMPELSON LABS DISCLAIMS ALL WARRANTIES, EITHER EXPRESSOR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL AUTHOR AND COMPELSON LABS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF AUTHOR AND COMPELSON LABS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

GiantDisc is a package of mp3 Jukebox software tools.
It consists of:
- Linux server scripts to manage and play mp3 tracks
- a Palm remote control application which allows to fully control the mp3 server.
No screen or keyboard needs to be attached to the server. The software has been designed to easily manage thousands of mp3 tracks and it offers the possibility to record CDs and import/export mp3 tracks.
The whole design makes entirely use of standard hardware and free software.
Other features:
- FreeDB (CDDB) support
- Lyrics management
- Web interface
- Networking support
- Synchronization of independent GiantDisc servers.
Enhancements:
- Support for the network attached mp3 streaming client
- Exstreamer
System requirements:
- PalmPilot Personal
- Palm OS v2.0

MobileMule is a small subproject of eMule, which lets you control your eMule with any java-enabled mobile phone (actually not any, but most). Note that MobileMule is NOT a eMule for your mobile phone, but a remote control for your eMule.
Which mobile phones are supported?
Basically all java enabled mobile phones which have 40 KB free fixed memory and about 150-200KB Heap. A color display is strongly recommended (many older phone types - especially from Nokia - with non color display do not have enough free Heap anyway. Also you need to be able to access the Internet via HTTP. All java-enabled mobile phones should supported this, however it is possible that your contract doesnt allows internet access (prepaid) or that your carrier offers only restricted access. Anyway, the best way to find out is to try it.
Anything else needed?
Yes, your port 80 must be open reachable for incoming connections. So if you have a router or firewall you have to open this port.
Installation
1. Before Installing MobileMule
Before you beginn to install MobileMule make sure you meet all Requirements:
- You have a Java-enabled mobile phone (which is not on the "blacklist")
- You can access the Internet (WAP Gateway or direct Web access)
- Port 80 on your Box is reachable for incomming connection
2. Downloading
Ok, now that you know you could theoretically use MobileMule, it is worth a try to install it ;) Go to the download site and get the most current eMule version. This version is based on the latest official Release, but makes also sure that the MobileMule implementation is the most current one. It is possible that the last eMule release has already the most current MobileMule protocol, in this case you will find a notice about it on the download site. Unpack the Zip-File and replace the your old Exe-File with the new one you just downloaded.
There are two possibilities to download MobileMule: WAP/OTA direct into your mobile phone or saving it on your PC and then transfer it to your handy with a datalink cable. If you have a datalink cable, the second method is recommended, because your Operator will probably charge you for OTA transfer, while the second method doesnt cause any costs. A guide to install MobileMule via WAP can be found on the download site. IF you dont know how to use your datacable, check your phone manual - it is impossible to explain this for all mobile phone types here.
3. Setup
MobileMule needs no further setup. However make sure that your phone settings (WAP, Security) are ok, so that MobileMule can access the internet. In most cases you wont have to change anything.
In eMule you have to activate the MobileMule server. Open the preferences -> Webinterface and click on "MobileMule enabled". Now enter a password, which you will need later to log in. If you use the webserver, make sure it is not assigned to Port 80, or the MobileMule server will not work.
Now you have MobileMule installed, read the rest of the guide to learn more about using MobileMule.
Preferences
You can reach the preferences form the loginscreen. Here is a description of all available options:
Port
With this option you can change the port which MobileMule uses to connect to eMule. You have to choose the same port in the preferences of eMule. Note: Some WAP Gateways do not allow to connections on ports other than 80. If you do not use a WAP gatway there should be no problem with choosing other ports.
Login Method
Here you can select which address format MobileMule should use to find your eMule. If you choose Client ID you have to enter the (high) ID which was assigned to your eMule when it connected to a server, for example "16777343". DynIP or IP lets you choose between your real IP of your PC (for example "212.101.30.14") or the address of a dynamic DNS, which allows you to connect to your eMule even if it changed its IP and you do not know the new IP(only if you installed a dynamic ip programm, please look into the manuals of your favourite dynamic DNS service). An example: "myMule.dyns.net"
Save Password
If you want MobileMule to save your password, enable this option. If you want more security and enter the password everytime you start MobileMule disable it.
Login
ClientID: Enter here the ID which was assigned to your eMule when it connected to a server. LowIDs will not work. Also your ID will change everytime when your IP changes. In future version there will be additional and easier options, which replace the ID (like Dynamic IPs, or an Accountname for an MobileMule account which you can create on this page).
Password: The password you selected in your eMule preferences for MobileMule.
If everthing works, you should now be able to loging, if not you will (probably) get an error message. here are some of the possible errormessages and their meaning:
Unexpected Servererror - MobileMule could not access the internet or it could not find your ID (IP). Make sure you securit settings allow MobileMule to access the internet and that your WAP/Web settings are right.
Wrong opcode received - The responding server was no MobileMule server. If you use a WAP gateway it could also mean that it could not find your ID/IP or that you operator does not allow to access the internet.
Password rejected - Well this should be quite clear :)
Wrong server version - Your eMule version is not compatible to your MobileMule version. Download the latest MobileMule and eMule files and try again
General Servererror - The server (emule) reported an error for some reason. Maybe there is a problem with your WAP Gateway which corrupted the message, but it could have many reasons
Important:
If you have any problems logging in, first try to use the option "Connection test". MobileMule will then try to connect to a server, which is for sure available and will response. If this test succeeds, but you cannot log into your eMule then the problem is located somewhere on your PC. Recheck if you started the MobileMule Server in eMule, if there was no Errormessage in the log and if you have set it to the default port, if you have used the correct ID or IP and if you firewall or router allows/forwards incoming connections on this port.
Status Overview
You can find some basic information about what your eMule does right now here. Everything should be selfexplaining (ok that sounds strange for a HowTo ;) ).
Downloads
On this screen you will see all current downloads and their status. Two red rectangles means this file is paused, a green circle indicates that this file has the waiting state while a filled green circle is a file which is currently receiving data.
You have 4 options here: Cancel, Delete and Pause/Resume should be clear. However be warned: currently there MobileMule will not ask you to confirm your selection if you choose to delete a file. The detail option leads you to the detail screen.
Preview
MobileMule can preview all movie files, which your eMule is currently loading or finished in its current session. Go into the "Finished Files" or "Downloads" screen and select Preview. eMule will try to grab the first frame from the selected movie, resize it to your mobile phones display size and send it.
The preview works with most codecs and video types, but there are some exception were eMule is not able to get a frame. In this case you will see an error message or a complete black image. Also you will only be able to use the preview if your phone has a color display and enough memory to recieve and draw the picture.
Also please keep in mind that the picture has a size of about 5-10KB (depending on the size of your display). This means that it will take a moment until the picture is loaded and it also means that if your operator charges you for transferred volume you should use this option careful.
File Details
This screen contains all information about a file, which you could also find in the eMule download window.
Search
Type the keyword you want to search for into the field (in the prior screen), select a file type and then click start. MobileMule will show you up the 15 results which have the most sources available. The number on the right will you you how many sources this file has. However it has max. 2 digits, meaning if there are more than 99 sources it will show 99.
You have two options here: Detail will show you more details about the selected file like the full name, filesize and how many sources it has and Download will tell eMule to download this file.
Commands
There are currently two commands available here. You can shut down your PC (and turn off power) or shut down eMule. Of course shutting down your PC will result in shutting down eMule too. Another note: Do not expect to be able to connect to your eMule after you used one of those commands ;)
System requirements:
- Java-enabled mobile phone
- Internet connection (WAP Gateway or direct Web access)
- port 80 must be open reachable for incoming connections