Free their destination software for pda

Have you ever tried to copy the contacts database from one S60 based phone to another? Perhaps using a PC suite or SyncML? Perhaps you have noticed that something was missing in the end? No problem, with the Contacts Transfer application you can copy the entire contents of the contacts database includig thumbnail images and caller groups from one phone to another via bluetooth, infra-red or a memory card.
Contacts database (phonebook) transfer for S60 based mobile phones. So far none the PC suites for S60 based mobile phones that I have seen offer a complete contact database import/export functionality, something is always lost in the conversion. This is true also if you try to use SyncML and synchronize your contacts with MS Outlook for example. From this need came the Contacts Transfer application - it transfers the whole contents of the contacts database including thumbnail images and caller groups from one S60 based mobile phone to another via bluetooth, infra-red or a memory card.
If you do not have two SIM cards so that you could have two phones powered on to transfer the data directly from one phone to another you can use a PC (equipped with bluetooth or IR transmitter/receiver or a memory card reader) in the middle. Here are instructions to perform the transfer if you are using bluetooth, infra-red of a memory card on both phones (note that you can also use different media for the phones, e.g. export using infra-red and import using a memory card, if youre using a PC in the middle to transfer the intermediate file):
Start Contact Transfer application in the source phone.
Choose Export from the Contacts menu.
Select media (bluetooth, infra-red or file). If you choose bluetooth, turn the destination phones bluetooth on at this point.
If you chose file (i.e. a memory card), select MMC (E:) from the drive menu.
The contents of your contacts database will be exported and zipped.
Depending on the media you chose, the procedure continues as follows:
- Bluetooth:
You will be prompted to turn bluetooth on if its not already turned on.
A search for nearby bluetooth devices is performed. Note that you must have your destination phones bluetooth turned on before this step.
From the list of found devices, pick your destination phone.
You will receive a new message in your destination phones Inbox, which cannot be opened normally.
If youre using v3.x, you need to save the received file from Inbox to the "Others" directory on either the phone or a memory card.
Start Contacts transfer in the destination phone.
Choose Import, File and if youre using v2.00, choose Internal (C:), or if youre using v3.x, choose either Internal (C:) or Memory Card (E:) depending on where you saved the file.
Contacts Transfer will locate the import data from the Inbox if youre using v2.00 or load the file from the "Others" directory from the selected drive if youre using v3.x.
Contacts will be imported to the destination phones phonebook.
Press ok when prompted, and database compression will be executed.
After import and compress is done, you can delete the message from the Inbox.
- Infra-red:
Align your source phone with your PCs IR receiver (or the destination phones IR receiver).
If youre using a PC in the middle:
You will get a prompt on your PCs screen to accept a file from the source phone.
Confirm the query and a file called Contacts.data.z will be transferred to your PC.
Start Contacts Transfer in the destination phone.
Choose Import and Infra-red from the menus.
Align your destination phone with your PCs IR receiver (or source phones IR receiver).
If youre using a PC:
Drag and drop (or use the send to command from the context menu) the file you received earlier to the IR device.
Contacts data is transferred to the destination phone.
Contacts will be imported to the destination phones phonebook.
Press ok when prompted, and database compression will be executed.
- Memory card:
The exported contacts data is saved to your memory card.
When prompted, press ok and you can remove the memory card from your source phone.
Insert the memory card to your destination phone.
Start Contacts Transfer in your destination phone.
Choose Import, File and MMC (E:) from the menus.
Contacts transfer will locate and import data from the memory card.
Contacts will be imported to the destination phones phonebook.
Press ok when prompted, and database compression will be executed.
After import and compress is done, you can delete the intermediate file from your memory card.
Note that you may need a lot of space on your phones C: drive because the contacts database will be heavily fragmented during the import operation. This of course depends on the size of your contacts database but I have seen it get over a megabyte. The contacts database will be automatically compressed when import is finished.
Enhancements:
- Fixed a bug in file export operation.

Shortcovers for iPhone 1.1 is a simple to use as well as important digital destination for people to discover and experience their next great read, on any mobile device.

It is both an online and mobile service that gives readers instant access to the newest books, hottest authors, and most popular magazines and blogs as well as new content formats and user-inspired writings such as subway novels and fan fiction. This also provides consumers with the tools for sharing their favorite reads and creating their own Shortcovers. It is not just for avid readers, but for anyone who wants the convenience of accessing and reading their favorite content, anytime, anywhere, on the mobile devices they already own.

Note: The "Download Now" link directs you to the iTunes App Store, where you must continue the download process. You must have iTunes installed in order to open the link, and you must have an active iTunes account to download the application. This download may not be available in some countries."

Enhancements:

• Includes more meaningful error messages
• Performance improvements
• Minor bug fixes.

Requirements:

• Compatible with iPhone and iPod touch
• Requires iPhone 2.2 Software update.

Caltrain+ has the following features:
- Schedules for weekday, non-weekend holiday, and weekend service.
- Tapping on a train number brings up fare, zone, and travel time, and distance information (a subsequent Copy command will copy this text to the clipboard).
- Tapping on departure or arrival column brings up station information (a subsequent Copy command will copy this text to the clipboard). It also allows alarms to be set or cleared.
- Tapping on direction highlight toggles direction (saves one tap).
- Highlighting (color or bold) alternating fare zones in station list popups.
- A Preference Form, to enable or disable the following capabilities:
o Displaying todays schedule automatically (including Holidays) at startup
o AM/PM or 24-hour time format
o Ability to keep station popups centered on last choice (PalmOS 4.0 or greater only)
o Default minutes before triggering an alarm (see below for a more complete description of alarms)
- An Alarms Form, to show which alarms are currently set. Alarms are described in detail below.
- Pannable Color higher-resolution System Route Map (requires PalmOS 3.5 or greater)
- A Menu Item for switching to the BART Quick Planner (if it is installed).
- Support for 5-way navigator button (found on certain PalmOne models).
Alarm Information
Starting with Version 3.4, Caltrain+ has the ability to trigger alarms a specified number of minutes before a train departs or arrives. This is a complex feature that bears further explanation (though the goal is to make usage as intuitive as possible). Here are the details:
- Alarms are recurring (e.g. for commuters who ride the train on a regular basis). For non-recurring alarms there is already the Datebook, and this should be used.
- To set an alarm, start by tapping a time in either the departure or arrival column of a particular train. This brings up the detail popup window, which contains the alarm set/clear button. The button label toggles depending on whether the alarm is set or cleared.
- Next select the number of minutes before the train arrives/departs that you wish to be notified, using the popup to the right of the alarm set/clear button. Currently 5-60 minutes in increments of 5 minutes is supported. The default number of minutes may be specified in the preferences panel.
- Once an alarm is set, the popup is locked and displays the number of minutes selected as the advance notification interval. Clearing the alarm will unlock the popup.
- An alarm will be triggered the specified number of minutes before every train matching the schedule class. I.e., if an alarm is set for a M-F train, it will be triggered every weekday until cleared.
- There is logic for detecting holidays, and an alarm that would otherwise trigger will be skipped on a holiday (e.g. a M-F alarm will not trigger on Labor Day). The holidays recognized are limited to Xmas, Presidentss Day, Memorial Day, Independence Day, Labor Day, and Thanksgiving.
- A train for which an alarm is set is highlighted in red/bold in the display.
- A maximum of 4 alarms may be set concurrently.
- The Alarms Form can be used to 1) see which alarms are set; 2) cancel individual alarms; 3) cancel all alarms.
- This feature works best with the Attention Manager (PalmOS 4.0 or greater). Earlier versions of Palm will work but the notification menu is crude and there is no snoozing or nagging.
- You can only set alarms for a holiday on the day of the holiday, and those alarms will be one-shots (non-repeating). Otherwise there are no restrictions (e.g. you can set a M-F alarm on a Saturday.
Troubleshooting & Known Problems
- "Blank display" (Grid shown but no text): this has been reported on the Treo 600 and 650 models. The cause has not been isolated: it seems to affect only a small number of units, and seems related to firmware (upgrading to a new firmware version has been known to both cause and solve this problem. No known workaround
- Resets after installing Caltrain Application. This is occasionally seen on all models, though again the Treos seem the most susceptible. Here are several things to try (ordered in increasing order of severity) that have been known to work on occasion:
1. explicitly delete Caltrain app from your handheld, and try to re-install
2. extract .prc file from the .zip archive instead of downloading directly (some browsers known to have a hard time handling .prc binaries)
3. Clean out your Hotsync directories. This from a user: "I found the last two versions of the Caltrain application that I was trying to update inside the "Install" folder which was inside my User Folder. For some reason, that application remained in that folder even after I deleted it from the handheld and from the Quick Install application. After I deleted the .prc files from the "Install" folder and rebooted the machine, everything worked normally. I used the Quick Install application and successfully installed the new program that I originally wanted to install"
4. Search your system and delete all instances of the Caltrain .prc files. Then delete Caltrain app from your handheld. Finally download a fresh .zip, extract the .prc, and try to install that.
5. Try using the free dbScan utility on your handheld.
6. Try (soft) resetting your handheld before attempting steps 1-5.
Enhancements:
- Updated to reflect the April 2, 2007 schedule and fares.
- New Features:
- "T" mode for displaying Redwood City Transfers. You select this by toggling the "T", "L", "A" popup thats immediately below the "Caltrain Schedule" header in the upper left hand corner of the main display. In "T" mode, routes requiring a RWC transfer will be displayed in bold green in the Train column. Tapping on Train or Origin columns will give the number of the train you are to transfer to; tapping on the Destination column will give information for the transfer train, including departure time.
- Trains form for displaying all the stops for a train rather than the converse. You can enter this form by either 1) tapping the Trains View button shown in the Schedule Detail form; or 2) selecting Trains in the Commands menu. If you navigate via the Trains View button the schedule for the corresponding will be shown. While in the Trains View, the 5-way navigator will behave the same way as in the main view.
- New abbreviated Help form.
- Bugfixes:
- Corrected a problem where alarms would cause the wrong train (or no train at all) to be bolded.

Target Assistant Lite is a free trial version of Target Assistant 2007. Purchase the full version to enjoy setting multiple targets, a desktop conduit, the Target Manager desktop application, report printing, network sharing among registered users and more.

A life without a goal is like sailing a ship without a map. A journey without resources and support is a hike in the woods without a compass. In order to arrive at the final destination, we need both a plan and sufficient resources.

All of us have dreamed, or even set a goal to play a musical instrument, save money, graduate, lose weight, sail the Atlantic, read a book, write a book, improve our health, spend more time with the family, quit smoking or anything else that we have never tried or done before. The last time you did so, were you successful? What were the reasons for your failure? Had you planned well? Had you started at all? Did you get bored?

Target Assistant is designed to support you along the way, as a compass guiding a ship in the right direction. There is no doubt you are a brave person who dares to dream big and believes everything is possible. Target Assistant will teach you how to set goals and plan for success in order to achieve your dreams for good this time. You will measure your progress and modify your plan to make it more effective. You will join the Target Assistant Net community, a place where you can share your achievements and get support from others. Along the journey, you will become a “winner”!

The objective of this application is to provide a tool with tourist figures for the Caribbean, to be used in mobile devices, specifically PDA. "Take this valuable information with you, wherever you need it", this is the key.
This version contains the series 1990 - 1999 and 2000 - 2005 of 34 tourist destinations in the Caribbean, the information is classified in four indicators:
Tourists Arrivals.
Tourist Accommodations.
Passengers of Cruises.
Estimated of Visitors expense in Million Dollars.
Main features:
- Selection of the desired data series 1990 - 1999 or 2000 - 2005.
- Selection of the desired destination.
- Present year / year of comparison.
- Selection of the Tourism indicator.
- Operations with that indicator.
- Period data.
- Multi-lingual available in: Spanish, English, French and German.
- Facility to update the data or the application via Internet.
- Simple and intuitive.
- Free of costs, it is free
System requirements:
- Pocket PC 2002 / WM 2003
- .NET CF runtimes

Zhiing 0.88.19 is useful tool which is designed to help easily you connect people-to-people, people-to-places and people-to-services with dynamic maps and turn-by-turn driving directions. Simply enter the mobile number you want to zhiing and hit send. Your zhiing buddy receives not only your text message (with up to 25x more message space than an SMS), but a dynamic map showing turn-by-turn directions of where you're at, or where want to meet. Zhiing gives you 100% control of your location, 100% of the time.

Best of all, the zhiing application and services are free (standard data and messaging charges for the receiver's mobile carrier may apply.) Even mobile devices that are not currently supported will receive SMS messages with turn-by-turn directions when they reply to the incoming zhiing with their current location.

A powerful browser add-on is available at zhiing site. Once installed in a supported browser, zhiing recognizes addresses and lets you send that address to any mobile number by clicking on the zhiing icon. Think of it...you're running out the door but before you leave you send yourself zhiings for all the places you need to go. Now from wherever you are you can retrieve the zhiing with directions to where you need to go next.

Major Features:

1. Your friend just zhiinged your phone with her location so you can meet up for a drink.
2. You found a great restaurant online on your computer. Send a zhiing to yourself and a friend with info on what time to meet up via the browser add-on for Firefox, Flock, Explorer, Safari or Chrome
3. Stranded on a dark corner in the middle of nowhere? zhiing for a ride.
4. Your business lunch plans have changed and nobody knows where to go - zhiing everyone from your final destination.

Moving Day is a database application for the Palm o/s.
It allows the user to keep track of which items are in which box, when moving from one home or office to another.
The database contains space for the number of the box, the room the box is associated with and the contents of each box.
This makes it easier to locate certain items when the user arrives at the new destination.
System requirements:
- Palm OS v3.0
- 37KB