Free repeating crossbow software for pda

TripMate is a program that helps you remember the route.

It can be route from conference room to coffee-room, it can be a tourist trip, it can be pathway in labyrinth.

During first traversal you make notes in you phone, specifying direction of movement and target of each step. Phone remembers how much time each steps takes. Then you can just inspect information about this trip and check duration of each stage and the whole trip. You can also replay it in forward and backward direction. So if somebody show you the shortest way to coffee machine, you can easily find the way back and can repeat this trip in future.

Description

The main menu of TripMate contains list of trips. Add new trip and specify its description. The program automatically switches to the mode of specifying the trip. In this mode you are adding trip points. For each point you should specify direction and optional description (target). When all steps are specified, choose Finish command to end the trip. It is possible to edit description and direction of each point, but it is not possible to add or remove new points to the trip. If you close application in enter trip mode, it will be in the same mode after restart. TripMate automatically calculate time of each stage (point time is set when you execute Enter command)
When trip is finished, you can view and edit trip points (List command) and relay trip in forward or backward direction (Navigation command). Navigation is performed using the same time scale. You can suspend/resume navigation or visa versa move current position to the next point. Navigation is perform in graphic or text mode. In graphic mode, TripMate shows movement of marker through the graph representing the route. In text mode, it shows description of next point, elapsed and left time for each step and the whole trip.
When navigation is suspended, current position cursor start rotation. When navigation is finished (last point is reached), arrow cursor is replaced with filled circle.

Caltrain+ has the following features:
- Schedules for weekday, non-weekend holiday, and weekend service.
- Tapping on a train number brings up fare, zone, and travel time, and distance information (a subsequent Copy command will copy this text to the clipboard).
- Tapping on departure or arrival column brings up station information (a subsequent Copy command will copy this text to the clipboard). It also allows alarms to be set or cleared.
- Tapping on direction highlight toggles direction (saves one tap).
- Highlighting (color or bold) alternating fare zones in station list popups.
- A Preference Form, to enable or disable the following capabilities:
o Displaying todays schedule automatically (including Holidays) at startup
o AM/PM or 24-hour time format
o Ability to keep station popups centered on last choice (PalmOS 4.0 or greater only)
o Default minutes before triggering an alarm (see below for a more complete description of alarms)
- An Alarms Form, to show which alarms are currently set. Alarms are described in detail below.
- Pannable Color higher-resolution System Route Map (requires PalmOS 3.5 or greater)
- A Menu Item for switching to the BART Quick Planner (if it is installed).
- Support for 5-way navigator button (found on certain PalmOne models).
Alarm Information
Starting with Version 3.4, Caltrain+ has the ability to trigger alarms a specified number of minutes before a train departs or arrives. This is a complex feature that bears further explanation (though the goal is to make usage as intuitive as possible). Here are the details:
- Alarms are recurring (e.g. for commuters who ride the train on a regular basis). For non-recurring alarms there is already the Datebook, and this should be used.
- To set an alarm, start by tapping a time in either the departure or arrival column of a particular train. This brings up the detail popup window, which contains the alarm set/clear button. The button label toggles depending on whether the alarm is set or cleared.
- Next select the number of minutes before the train arrives/departs that you wish to be notified, using the popup to the right of the alarm set/clear button. Currently 5-60 minutes in increments of 5 minutes is supported. The default number of minutes may be specified in the preferences panel.
- Once an alarm is set, the popup is locked and displays the number of minutes selected as the advance notification interval. Clearing the alarm will unlock the popup.
- An alarm will be triggered the specified number of minutes before every train matching the schedule class. I.e., if an alarm is set for a M-F train, it will be triggered every weekday until cleared.
- There is logic for detecting holidays, and an alarm that would otherwise trigger will be skipped on a holiday (e.g. a M-F alarm will not trigger on Labor Day). The holidays recognized are limited to Xmas, Presidentss Day, Memorial Day, Independence Day, Labor Day, and Thanksgiving.
- A train for which an alarm is set is highlighted in red/bold in the display.
- A maximum of 4 alarms may be set concurrently.
- The Alarms Form can be used to 1) see which alarms are set; 2) cancel individual alarms; 3) cancel all alarms.
- This feature works best with the Attention Manager (PalmOS 4.0 or greater). Earlier versions of Palm will work but the notification menu is crude and there is no snoozing or nagging.
- You can only set alarms for a holiday on the day of the holiday, and those alarms will be one-shots (non-repeating). Otherwise there are no restrictions (e.g. you can set a M-F alarm on a Saturday.
Troubleshooting & Known Problems
- "Blank display" (Grid shown but no text): this has been reported on the Treo 600 and 650 models. The cause has not been isolated: it seems to affect only a small number of units, and seems related to firmware (upgrading to a new firmware version has been known to both cause and solve this problem. No known workaround
- Resets after installing Caltrain Application. This is occasionally seen on all models, though again the Treos seem the most susceptible. Here are several things to try (ordered in increasing order of severity) that have been known to work on occasion:
1. explicitly delete Caltrain app from your handheld, and try to re-install
2. extract .prc file from the .zip archive instead of downloading directly (some browsers known to have a hard time handling .prc binaries)
3. Clean out your Hotsync directories. This from a user: "I found the last two versions of the Caltrain application that I was trying to update inside the "Install" folder which was inside my User Folder. For some reason, that application remained in that folder even after I deleted it from the handheld and from the Quick Install application. After I deleted the .prc files from the "Install" folder and rebooted the machine, everything worked normally. I used the Quick Install application and successfully installed the new program that I originally wanted to install"
4. Search your system and delete all instances of the Caltrain .prc files. Then delete Caltrain app from your handheld. Finally download a fresh .zip, extract the .prc, and try to install that.
5. Try using the free dbScan utility on your handheld.
6. Try (soft) resetting your handheld before attempting steps 1-5.
Enhancements:
- Updated to reflect the April 2, 2007 schedule and fares.
- New Features:
- "T" mode for displaying Redwood City Transfers. You select this by toggling the "T", "L", "A" popup thats immediately below the "Caltrain Schedule" header in the upper left hand corner of the main display. In "T" mode, routes requiring a RWC transfer will be displayed in bold green in the Train column. Tapping on Train or Origin columns will give the number of the train you are to transfer to; tapping on the Destination column will give information for the transfer train, including departure time.
- Trains form for displaying all the stops for a train rather than the converse. You can enter this form by either 1) tapping the Trains View button shown in the Schedule Detail form; or 2) selecting Trains in the Commands menu. If you navigate via the Trains View button the schedule for the corresponding will be shown. While in the Trains View, the 5-way navigator will behave the same way as in the main view.
- New abbreviated Help form.
- Bugfixes:
- Corrected a problem where alarms would cause the wrong train (or no train at all) to be bolded.

CalcRogue is a Rogue-like game in the style of ADOM which runs on TI-89, TI-92+, and V200 calculators, PalmOS, Windows, and Unix.
Main features:
- Complex, randomly generated levels
- Overworld map, towns, and quests
- Spells and magically summoned minions
- Easy to use interface with tutorial
- Line of sight/lighting calculation
- Four-color grayscale graphics
- Complete inventory management system
- Wide variety of magical scrolls, potions, wands, rings, amulets and spells
- Missile combat with bows, crossbows or thrown potions
- Compressed saved games
- In-game help
- Hidden traps and doors
- Five different player classes
- Varied monsters with special powers
- Gold and shopping
- High-score listing

This program picks a random country from 174 country names. Tap the button to pick a random country name. NOTE: The same country does not repeat 2 times in a row.
This program requires that you have both the BeanDLL.dll file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the Windows folder of your PocketPC computer. For free support on installing email me.
System requirements:
- BeanDLL.dll file (found in the download section)
- Visual Basic runtime files

Free OS theme for Pocket PC.
System requirements:
- Pocket PC

This program is a database of 109 chemical elements. Tap the button to pick a random chemical name. NOTE: The same chemical doesnt repeat time over time.
This program requires that you have both the BeanDLL.dll file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the Windows folder of your PocketPC computer. For free support on installing email me.
System requirements:
- BeanDLL.dll file (found in the download section)
- Visual Basic runtime files