Free official software for pda

Grand Theft Auto IV official trailer 1 offers you an official teaser trailer for Grand Theft Auto IV, the first game in the franchise in development for the PlayStation 3 and Xbox 360. It's not yet clear which console was used to film the trailer. The QuickTime movie is 640x360 pixels and runs at 60fps for about 1 minute.

Categorized list of contents of Official US Playstation Magazine demo discs.
If you have a large collection of these demo discs, use this list to quickly find a game demo, cool move, game save download, and any other content on these discs.
Requires HandyShopper 2, linked above in the requirements.
This list will appear in the avilable lists in the HandyShopper application.
System requirements:
- Palm OS v2.0
- HandyShopper - English

MobileMule is a small subproject of eMule, which lets you control your eMule with any java-enabled mobile phone (actually not any, but most). Note that MobileMule is NOT a eMule for your mobile phone, but a remote control for your eMule.
Which mobile phones are supported?
Basically all java enabled mobile phones which have 40 KB free fixed memory and about 150-200KB Heap. A color display is strongly recommended (many older phone types - especially from Nokia - with non color display do not have enough free Heap anyway. Also you need to be able to access the Internet via HTTP. All java-enabled mobile phones should supported this, however it is possible that your contract doesnt allows internet access (prepaid) or that your carrier offers only restricted access. Anyway, the best way to find out is to try it.
Anything else needed?
Yes, your port 80 must be open reachable for incoming connections. So if you have a router or firewall you have to open this port.
Installation
1. Before Installing MobileMule
Before you beginn to install MobileMule make sure you meet all Requirements:
- You have a Java-enabled mobile phone (which is not on the "blacklist")
- You can access the Internet (WAP Gateway or direct Web access)
- Port 80 on your Box is reachable for incomming connection
2. Downloading
Ok, now that you know you could theoretically use MobileMule, it is worth a try to install it ;) Go to the download site and get the most current eMule version. This version is based on the latest official Release, but makes also sure that the MobileMule implementation is the most current one. It is possible that the last eMule release has already the most current MobileMule protocol, in this case you will find a notice about it on the download site. Unpack the Zip-File and replace the your old Exe-File with the new one you just downloaded.
There are two possibilities to download MobileMule: WAP/OTA direct into your mobile phone or saving it on your PC and then transfer it to your handy with a datalink cable. If you have a datalink cable, the second method is recommended, because your Operator will probably charge you for OTA transfer, while the second method doesnt cause any costs. A guide to install MobileMule via WAP can be found on the download site. IF you dont know how to use your datacable, check your phone manual - it is impossible to explain this for all mobile phone types here.
3. Setup
MobileMule needs no further setup. However make sure that your phone settings (WAP, Security) are ok, so that MobileMule can access the internet. In most cases you wont have to change anything.
In eMule you have to activate the MobileMule server. Open the preferences -> Webinterface and click on "MobileMule enabled". Now enter a password, which you will need later to log in. If you use the webserver, make sure it is not assigned to Port 80, or the MobileMule server will not work.
Now you have MobileMule installed, read the rest of the guide to learn more about using MobileMule.
Preferences
You can reach the preferences form the loginscreen. Here is a description of all available options:
Port
With this option you can change the port which MobileMule uses to connect to eMule. You have to choose the same port in the preferences of eMule. Note: Some WAP Gateways do not allow to connections on ports other than 80. If you do not use a WAP gatway there should be no problem with choosing other ports.
Login Method
Here you can select which address format MobileMule should use to find your eMule. If you choose Client ID you have to enter the (high) ID which was assigned to your eMule when it connected to a server, for example "16777343". DynIP or IP lets you choose between your real IP of your PC (for example "212.101.30.14") or the address of a dynamic DNS, which allows you to connect to your eMule even if it changed its IP and you do not know the new IP(only if you installed a dynamic ip programm, please look into the manuals of your favourite dynamic DNS service). An example: "myMule.dyns.net"
Save Password
If you want MobileMule to save your password, enable this option. If you want more security and enter the password everytime you start MobileMule disable it.
Login
ClientID: Enter here the ID which was assigned to your eMule when it connected to a server. LowIDs will not work. Also your ID will change everytime when your IP changes. In future version there will be additional and easier options, which replace the ID (like Dynamic IPs, or an Accountname for an MobileMule account which you can create on this page).
Password: The password you selected in your eMule preferences for MobileMule.
If everthing works, you should now be able to loging, if not you will (probably) get an error message. here are some of the possible errormessages and their meaning:
Unexpected Servererror - MobileMule could not access the internet or it could not find your ID (IP). Make sure you securit settings allow MobileMule to access the internet and that your WAP/Web settings are right.
Wrong opcode received - The responding server was no MobileMule server. If you use a WAP gateway it could also mean that it could not find your ID/IP or that you operator does not allow to access the internet.
Password rejected - Well this should be quite clear :)
Wrong server version - Your eMule version is not compatible to your MobileMule version. Download the latest MobileMule and eMule files and try again
General Servererror - The server (emule) reported an error for some reason. Maybe there is a problem with your WAP Gateway which corrupted the message, but it could have many reasons
Important:
If you have any problems logging in, first try to use the option "Connection test". MobileMule will then try to connect to a server, which is for sure available and will response. If this test succeeds, but you cannot log into your eMule then the problem is located somewhere on your PC. Recheck if you started the MobileMule Server in eMule, if there was no Errormessage in the log and if you have set it to the default port, if you have used the correct ID or IP and if you firewall or router allows/forwards incoming connections on this port.
Status Overview
You can find some basic information about what your eMule does right now here. Everything should be selfexplaining (ok that sounds strange for a HowTo ;) ).
Downloads
On this screen you will see all current downloads and their status. Two red rectangles means this file is paused, a green circle indicates that this file has the waiting state while a filled green circle is a file which is currently receiving data.
You have 4 options here: Cancel, Delete and Pause/Resume should be clear. However be warned: currently there MobileMule will not ask you to confirm your selection if you choose to delete a file. The detail option leads you to the detail screen.
Preview
MobileMule can preview all movie files, which your eMule is currently loading or finished in its current session. Go into the "Finished Files" or "Downloads" screen and select Preview. eMule will try to grab the first frame from the selected movie, resize it to your mobile phones display size and send it.
The preview works with most codecs and video types, but there are some exception were eMule is not able to get a frame. In this case you will see an error message or a complete black image. Also you will only be able to use the preview if your phone has a color display and enough memory to recieve and draw the picture.
Also please keep in mind that the picture has a size of about 5-10KB (depending on the size of your display). This means that it will take a moment until the picture is loaded and it also means that if your operator charges you for transferred volume you should use this option careful.
File Details
This screen contains all information about a file, which you could also find in the eMule download window.
Search
Type the keyword you want to search for into the field (in the prior screen), select a file type and then click start. MobileMule will show you up the 15 results which have the most sources available. The number on the right will you you how many sources this file has. However it has max. 2 digits, meaning if there are more than 99 sources it will show 99.
You have two options here: Detail will show you more details about the selected file like the full name, filesize and how many sources it has and Download will tell eMule to download this file.
Commands
There are currently two commands available here. You can shut down your PC (and turn off power) or shut down eMule. Of course shutting down your PC will result in shutting down eMule too. Another note: Do not expect to be able to connect to your eMule after you used one of those commands ;)
System requirements:
- Java-enabled mobile phone
- Internet connection (WAP Gateway or direct Web access)
- port 80 must be open reachable for incoming connections

Specifically designed for Auto Road Rally events, TapPoint RallyTimer functions like a timing clock for your Palm OS(R) device that displays all of the times on-screen and allows you to save your timing sessions on the device for later review and comparison.
Features:
Accurately synchronize your clock to an external official clock.
Display times in units of sec, sec/10, min/100, or min/1000.
Record car numbers with each time, and attach text notes.
Label your sessions with event name, checkpoint number, and checkpoint name/location, and save them on the device in an easy-access session list.
Share your times with others by beaming or exporting sessions to other devices.
Use TapPoint RallyTimer instead of a stopwatch or dedicated rally clock to save time, hassle, and money!
TapPoint is a trademark of TapPoint, LLC.
System requirements:
- Palm OS v2.0

XSound Sound Player and Dictaphone theme
The Tropical theme
SymbCode decided to reduce the installation file size. The skins will be available separatly from the sis file. So, after you downloaded and installed the XSound Sound Player application, you will find the skins separatly on the official site.
At official site you can find the detailed description about the skin (theme) making for this great and famous application. So, from now you can create your own theme.
Enjoy it!
System requirements:
- XSound 1.1.2 or 1.1.3 have to be installed on the device

This database by Trevor Knight contains information relating to every current English football league club since 1888 when the league was first formed.

It can be used as a reference guide.

The database cointains the following information for each team:
- When the team was founded
- The home ground
- The official nickname
- Number of seasons spent in each division
- Number of championships won for each division
- Number of FA Cup wins
- Number of League Cup wins
- Number of promotions
- Number of relegations

To view this free database on your device you will need the SuperMemory application.

It will allow you to learn the cards up to 10-50 times faster and ensure that you never forget them again.

XSound Sound Player and Dictaphone theme
The Ice theme
SymbCode decided to reduce the installation file size. The skins will be available separatly from the sis file. So, after you downloaded and installed the XSound Sound Player application, you will find the skins separately.
At official site you can find the detailed descreption about the skin (theme) making for this great and famous application. So, from now you can create your own theme.
Enjoy it!
System requirements:
- XSound 1.1.2 or 1.1.3 have to be installed on the device

Halo 3 wallpaper pack is a popular and enjoyable collection of the three official Halo 3 wallpapers in various resolutions: 1600x1200, 1024x768, and 800x600.