modem
ModScan 1.01
This is Modbus master scanner supports Modicon ASCII and RTU protocols, useful for PLC or SCADA engineers. more>>
Communicate with device through a serial cable.
You need a NULL MODEM converter when connect to devices:
Supported Modbus ASCII and RTU protocols
Supported 4 function codes 01 (Coil Status), 02(Input Status), 03(Holding Register), 04(Input Register) in read mode
Data format supported: Binary, Hex, Unsigned Integer, Signed Integer (2 bytes), Floating Point, Swapped Floating Point (4 bytes), Double, Swapped Double (8 bytes).
Connect to device through serial cable with different speeds from 600 bps -> 115200 bps, 7 or 8 databits, 1 or 2 stopbits, parity and flow control.
Dynamically change information during scan
PhoneTime 0.4
PhoneTime is a full featured and advanced software which uses GSM 07.07 protocol (found in most cellular phones with a built-in IR modem) to set your cell phones time from your PDA. more>>
PhoneTime 0.4 is a full featured and advanced software which uses GSM 07.07 protocol (found in most cellular phones with a built-in IR modem) to set your cell phone's time from your PDA. At this time, PhoneTime has been tested with Siemens and Ericsson cellular phones, but should work with many other brands.
Requirements: Palm OS 3.2
ATime 1.0
ATime is a free, simple PQA program thats lets you access USNO Atomic Clock Time anytime, anywhere. more>>
If you have a wireless Palm or one with a modem, this application will give you the most accurate time available.
Just click on the Icon to get the Atomic Clock Time for all US standard Time Zones.
Palm AT Codes for HanDBase 1.0
Summary of the Palm Modem AT Codes. more>>
System requirements:
- HanDBase v.2.7x or greater
aDialCode 1.0 beta 1
aDialCode tells you how to dial to a city from another city. more>>
Before you start
aDialCode is a J2ME (Java 2 Platform, Micro Edition) compatible software. It runs on most mobile phone, Palm, and pocket PC devices which have the Java and the Internet access capabilities. If you want to install aDialCode on your mobile phone, please make sure that the GPRS service is also enabled for your phone. if aDialCode is installed on PDA devices, it also need the ability to connect the PDA with the Internet via WiFi, modem, or mobile phone.
Start aDialCode
In the first time, aDialCode will ask you to specify the "From" city (the city where you are calling from) and "To" city (the city where you are going to call to). Please read the Choose a City section below for how to specify a city. After you specified the cities, you can then execute the [Codes] function to get the dialing codes from aDialCode server. To connect with the Internet, the mobile phone will show the following question form to confirm this connection. Please select one of the "Allow for ever", "Allow for session", or "Allow for this query" options to enable the connection.
After the connection, aDialCode gets the dialing codes from the server, and shows the results.
Choose a City
The intelligent quick-find technology enables you to pick a city from the built-in 1116 cities list easily and quickly. You only need to input the city name prefix, aDialCode will then list the top 5 matched cities for you to choose. You can then press the [Done] button to choose the first city, or use the [Up], [Down] navigation keys to select another cities and press the [Center] key to confirm the selection.
Menu commands
More menu commands will be explained below.
Codes - Gets the dialing code from aDialCode server according to current "From" and "To" cities settings.
From City - Specifies the city where you are calling from.
To City - Specifies the city where you are going to call to
Swap From/To - Exchanges the "From" and "To" cities.
Main features:
- aDialCode tells you how to dial to a city from another city.
- Runs on most Java powered devices, mobile phone, Palm, and Pocket PC, with the minimum memory footprint.
- The intelligent quick-find technology enables you to pick a city from the built-in 1116 cities list easily and quickly.
System requirements:
- Java (J2ME CLDC-1.0/MIDP-1.0) powered devices
LinkDirect 0.2
PalmOS allows you to make a direct PPP connection through the Palm serial port (i.e. the cradle or Hotsync cable), without using any modem controls more>>
LinkDirect 0.2 represents you a tool for PPP connection through the Palm serial port (i.e. the cradle or Hotsync cable). Specifically, it do not need any modem controls. This is useful if you have a computer on a company LAN (or other high-speed Internet connection) and wish to connect your Palm to the network via that connection. Unfortunately, before PalmOS 3.3, you cannot choose the speed of the connection, and it is fixed at 19200 bps, which is quite slow. LinkDirect allows you to make such a connection at higher speed.
MsgAgent 0.37b
MsgAgent is regarded as a professional and smart Internet messaging client. more>>
MsgAgent 0.37b is regarded as a professional and smart Internet messaging client.
It fully supports SMTP, POP3, and NNTP directly by Palm device with the modem. Once tapping Sync button (or push Sync button on Palm modem), MsgAgent synchronizes messages with multiple mail and netnews servers. MsgAgent supports many charsets (Arabic, Baltic, Central European, Chinese (Simplified, Traditional), Greek, Hebrew, Japanese, Korean, Thai, Vietnamese, Western European).
No restriction for maximum message size. Up to 65000 configurable servers and 65000 folders/newsgroups for each mail/netnews account. Easy to add new servers/folders/newsgroups. Supports In-Reply-To, References header field. Never cut off threads. Viewer and Editor are integrated in MsgAgent.
Enhancements: Version 0.37b fixed the problem when Charset settings are disabled to set up on General Settings dialog.
Portable System Spec 2.69
This is a simple tool for those that want to gather the most important system specifications for their computer. more>>
With System Spec you can see, save and print a complete spec of your PC with this no-install, system information utility and perform various windows functions. Additional advanced info includes CPU, display, memory, drives, apps and more.
This version is a self contained standalone EXE which can be run without installing. It lists a specification of your Windows PC without listing lots of useless memory address and unnecessary information.
This utility can be used for comparing the specifications of different machines. The spec can be outputted to a text file or printed to a report.
Windows function such as shutting down and run can be performed from the System menu. The Control Panel menu allows you to quickly open items from the Control Panel.
As well as export to CSV System Spec can now export the system information displayed on the main system to a HTML file. This HTML file can then be uploaded to your website to show off your PCs Spec. To export to HTML go to File - Export to HTML.
Major Features:
- New features:.
- One of the most useful new features of the CD/DVD information window is its ability to list the CD/DVD drive's reading and writing capabilities. With many different CD/DVD drives around and often no capability indication on the front of the drive this feature can tell exactly what kind of drive is installed in staff, customers, friends, and other computers you may be working with.
- Another useful feature is the button to analyse the inserted media. This will tell what kind of media is in the CD/DVD drive. This is useful for DVD drives which can write to both DVD and CD media types.
- CPU info
- The following are given about your CPU.
-
- CPU Brand
- CPU Chip
- CPU Family
- Code Name
- Vendor
- Manufacturer
- Transistors
- Serial Number
- CPU-ID
- Ext Clock Speed
- Current Voltage
- Max Clock Speed
- Socket Designation
- Data Width
- Revision
- L2 Cache Size
- L2 Cache Speed
- CPU Speed
- CPU clock cycles
- CPU Features
- 3D Now! extensions
- Enhanced 3D Now! extensions
- Enhanced MMX extensions
- SIMD instructions
- FXSAVE/FXRSTOR instruction
- MMX extensions
- Serial number
- 36bit Page Size extension
- Page Attribute Table
- CMOVcc(+FCMOVcc/F(U)COMI(P) opcodes
- Machine Check Architecture
- Page Global Extension
- Memory Type Range Registers
- SYSENTER/SYSEXIT extension
- Processor contains an enable APIC
- CMPXCHG8B instruction
- Machine Check Exception
- Physical Address Extension
- Model Specific Registers
- Time Stamp Counter
- Page Size Extension
- Debugging Extension
- Virtual Mode Extension
- Built-In FPU
- FDIV Bug
- Drive Information
- Now displays SMART info. SMART information is available on newer hard disks.
- Other SMART information displayed
-
- raw read error rate
- spin uptime
- start / stop count
- reallocated sector count
- seek error rate
- power on count
- spin retry count
- calibration retry count
- power cycle count
- temperature Celsius
- reallocation event
- current pending sector
- off-line un-correctable
- ultra ATA CRC error rate
- multi zone error rate
- TA increase count
- System Information Shown
- Computer Name
- Username
- IP Address
- MAC Address
- Windows version and service pack
- Windows Serial Number
- Internet Explorer Version
- Memory
- CPU Type and speed
- Calculated CPU Speed
- Sound card type
- Video and virtual video adapters
- Screen Resolution
- Network Present
- Network Adapters
- AC Power Status (for laptops)
- Battery Charge Status (for laptops)
- Time Zone
- CD / DVD Make and model
- COM Ports
- LPT Ports
- Mouse capabilities
- Hard Disks
- Hard Disks Serial Number
- BIOS Date
- PC Serial number
- Manufacturer
- PC Product
- PCMCIA (Laptops)
- USB ports
- Firewire ports
- Motherboard
- Modem
- And many more...
Modem. And many moreLicense:Freeware
ModemLicense:Freeware
PStock beta 1.0a
Thank you for your interest in PStock, a stock quote download application for Palm OS 5 ONLY. more>>
The software allows you to download bid/ask prices from Yahoo Finance via the Yahoo stock ticker code. Eg. "BT.L" for British Telecom on the LSE FTSE, or "YHOO" for Yahoo Inc on the US Nasdaq.
This application is a beta - please report any bugs or suggestions; theres a reasonable chance I may be able to put it in.
PStock can connect to the internet using any standard Palm OS Network connection, whether that is modem, WiFi, or wired.
DialupMon 1.4.2.0
Ever forgot to disconnect from the internet with your modem? more>>
You specifiy the amount of time before DialupMon will prompt you to disconnect. If you choose to cancel the auto-disconnect then DialupMon will automatically extent your connection time and prompt you again later. If you are not there when this prompt is shown it will disconnect automatically! DialupMon will also show you all the connection information.
DialupMon could be a real money saver for you!
System requirements:
- 4MB RAM, 1MB SPACE
Nokia PC Suite 7.1.30.9
Free applications for Nokia phones that lets you edit, synchronize and back up many of your phones files more>>
Nokia PC Suite 7.1.30.9 is a powerful applications specially designed for Nokia phones that lets you edit, synchronize and back up many of your phones files. Nokia PC Suite is a package of Windows-based PC applications. Depending on your phone model, Nokia PC Suite lets you edit, synchronize and back up many of your phones files on a compatible PC through a cable or wireless connection.
Allowing you to take full control of your Nokia device through your PC, Nokia PC Suite makes accessing and using the data on your device simple and easy. Backup your photos and videos to your PC and keep your calendar, notes and contacts up to date by synchronizing them between your device and PC.
Major Features
- Back up and restore phone files
- Transfer information, pictures, and music from phone to phone or phone to PC
- Synchronize your phone and PC calendars
- Edit contacts, pictures, and phone file names
- Install Java-based applications in your phone
- Convert ringing tone formats
- Play multimedia messages and videos
- Send text messages from the PC
- Connect by using your phone as a modem
Requirements:
- Nokia Mobile Phone connected to your PC
Connect by using your phone as a . Requirements: Nokia Mobile Phone connected to your PC. Windows Vista 32-bit and 64-bit editions. Windows XP Professional x64 Edition. Windows XP (ProfessionalLicense:Freeware
Handspring Updater 1.0.0
Handspring Updater is a professional and smart tool which can help you update the Palm OS included on all Visor Solo, Visor and Visor Deluxe handhelds running Palm OS v. 3.1H2 or earlier. more>>
Handspring Updater 1.0.0 is a professional and smart tool which can help you update the Palm OS included on all Visor Solo, Visor and Visor Deluxe handhelds running Palm OS v. 3.1H2 or earlier.
Handspring Updater V1.0.0 installs a software update to the Palm OS that ships with all Visor Solo, Visor and Visor Deluxe handhelds. This application installs an update that provides the following:
- Calculator Launch Fix - This fix prevents unexpected launches of the Calculator when touching the Visor screen close to the Calculator launcher icon.
- Serial Modem Fix- This fix corrects an issue where a Visor may have difficulty performing a HotSync operation using a serial cradle when a modem Springboard module is installed.
- 8MB DRAM Memory Fix (if necessary)This fix corrects an issue where a limited number of Visor Deluxe handhelds manufactured between January and May, 2000 can experience a "fatal error" as a result of a faulty DRAM memory chip. This fix is only installed on affected Visor Deluxe handhelds; the version info window will now display "Palm OS Software v3.1H3M". Depending on individual usage patterns there may be an impact on battery life.
MSnap 0.2a
Screenshot program for Motorola P2K phones. more>>
System requirements:
- Motorola P2K phones
MSwitch 0.2
MSwitch is a program that helps you to quickly switch USB connection mode of Motorola P2K phones. more>>
System requirements:
- Motorola P2K phones
HotLaunch 1.0
HotLaunch is a potential and easy to use application which is designed specially for anyone that HotSync`s via network or modem and wants to be able to use the HotSync cradle button to trigger the HotSync. more>>
HotLaunch 1.0 is a potential and easy to use application which is designed specially for anyone that HotSync`s via network or modem and wants to be able to use the HotSync cradle button to trigger the HotSync.
- Page: 1 of 2
- 1
- 2
