Free logger software for pda

LOGGER: Logger - a road-crossing oddity.

This program records the way which you carry out thanks to your GPS connected to your Palm. It creates then a KML file which you can open with Google Earth to visualize your way on the map.
System requirements:
- Any Palm OS Hardware
- Palm OS 4.0
- 49KB RAM

The ThermaData logger is a cost effective, self-contained temperature data-logger or blind recording thermometer designed to record the temperature of the surrounding environment. The recording time and sample rate can be easily selected from the software and, unlike most low cost loggers, the ThermaData logger will continue recording during and after downloading the data. By selecting continuous logging it is possible to start the ThermaData logger only once and never have to reset its parameters again, even if downloaded regularly.

The user can set high and low alarm values for an application. A button push will allow a simple visual inspection of the unit to show if either of these limits has been exceeded. An illuminated red LED will warn the user that the alarm limits have been exceeded (reject) or an illuminated green LED will advise the user that the alarm limits have not been exceeded (accept).

The ThermaData logger is housed in a water-resistant polyethylene case and is available in seven colours: blue, white, yellow, green, red, brown and black.

The logger software demonstrates the flexibility and availability of options for use of the product while not requiring the product to be present.

The ThermaData Palm application has been designed to enable ThermaData logger users to download data without removing the ThermaData logger from its monitoring position. The ThermaData Palm interface plugs into any PalmOS hand held computers serial connection lead.

There are two methods of download, manual prompts the user for connection of the ThermaData logger and once uploaded the data is shown on screen. Auto acquire mode checks automatically for a connected ThermaData logger. Once the upload is complete a bleep signifies the finish of the process. Once uploaded from the ThermaData logger the files can be viewed in different formats. The summary gives an overview of the data including start and end dates and times, number of samples taken, alarm settings and number of alarms that have occurred.

The graph feature shows the data as a line graph.

The zoom feature allows the user to zoom in and view down to 10 samples per screen, then by tapping on a point on the graph the sample number, time, date, temperature value and alarm status of sample are displayed. The data/alarms can be viewed as a list. User notes can be added and attached to the file. Palm Hotsync transfers the data to a PC where it may be interrogated using the ThermaData logger application.

Hamlog is a simple quick contact logger.

A mobile logging DBase for Amateur Radio operators. Good for portable or mobile operations.
This logging DBase is simple and like other loggers that you may have used. A few things about this log is it will log your date and time as you enter the record. Also, by tapping RST a pop up will appear allowing you to insert a 59 for the report. Some times its hard to enter text on a Palm OS device so a field was added called scribble. This allows you to jot a quick note like a "sticky note".
System requirements:
- HanDBase v.2.7x or greater

SA Mammals is a freeware logger for Animal lovers. Log your sightings and add notes for your future reference.