Pocket UPS 1.0

Pocket UPS is a Pocket PC program which enables the user to retrieve the critical information monitored by an APC Smart-UPS or Back-UPS Pro.

How do you you know if your computer hardware is overloading your UPS? You dont unless you ask the UPS. Most of the Smart-UPS models have a built-in computer and serial port (9 pin female connector on back) to which a Pocket PC with Pocket UPS software and a cable can be connected.

Once connected, start Pocket UPS and everything else is automatic. Whether you need to check for an overloaded UPS, test battery condition, monitor high/low input voltage or just check the UPS temperature, Pocket UPS makes it easy.

Pocket UPS should work on any APC Smart UPS with a serial port (most of them). Pocket UPS has been tested on the following UPS units.

APC Smart UPS 400 - Full functionality
APC Smart UPS 700 - Full functionality
APC Smart UPS 1000 - Full functionality
APC Back-UPS Pro 650 - Everything but internal temperature monitoring which the UPS doesnt provide

You can easily make your own cable adapter to connect the 9 pin female serial cable connector on your hot sync cradle (or standalone hot sync serial cable) to the UPS.